FMI WCM-42G - Manual (Page 29)

www.fmiproducts.com 122271-01D 29
Figure 26 - Installing Fireplace Screen
Ring
Screen
Push
On Nut
Screen
Rod
Bracket
Smoke Shelf
Screen
Rod
Fireplace Front
INSTALLING FIREPLACE HOOD
AND SCREEN
1. Mount screen rod brackets on left and right
side of smoke shelf with #8 x 1/2" screws
provided (see Figure 27, page 29).
2. Slide round end of screen rod into rings
at top of screen. Attach one push-on nut
to end of rod before attaching last ring of
screen.
3. Insert round end of rod into rod bracket
on left side of fireplace.
4. Mount flat end of screen rod with #10 x 5/8"
to center of smoke shelf (see Figure 26).
5. Install other screen rod in same manner.
Brick inSTallaTion
Continued
glaSS door inSTallaTion
Figure 27 - Assembling Door Frame
Figure 28 - Installing Door Frame
L-Shaped Gusset
Flat Head Screw
Installation
To install glass door frame, construct an
opening (see table) on the front face of the
fireplace. Insert door frame into face opening
and tighten screws (see Figure 28).
Top
Bottom
1" Cap Screw
Left and Right
3/4" Cap
Screw
Top and
Bottom
A
B
MODEL A B
36" 37"±1/4" 34"±1/4"
42" 43"±1/4" 34"±1/4"
50" 51"±1/4" 34"±1/4"
IMPORTANT: Install glass door
frame before installing glass
door.
DOOR MODELS BDM36E/G/C,
BDM42E/G/C AND BDM50E/G/C
Assembly
Insert L-shaped gussets starting at the left top
portion of door frame. Gusset holes should
align with screw holes on the frame. Secure
using flat head screws.