Fisher PJ-Net - Manual (Page 43)

43
Network Unit
OWNER’S MANUAL
ENGLISH
Save a Set
1
Decide your desired PC adjustment val-
ues through the PC Adjustment pages
“1”to “2”.
2
Display the page “3” and select a mode
number with the pull-down menu button
of the Save to. Type a memo into the
Memo text area for simply description of
your selected number.
3
Register by clicking Set button.
To restore the adjustments, click
Reset button.
Load a Set
Select a set to load with the pull-down menu button of the Load Set No. and click Set but-
ton. The stored setting values will be applied to the each PC adjustment item.
Select a mode by
clicking the button
Type a memo for
the selected mode
Select a load mode
by clocking the but-
ton
The memos for Mode1 to Mode 5 are dis-
played with “Stored” or “Free”. The
memos for ExMode6 to ExMode50 are can
be stored with the input text.
Control the projector
✐ The PC adjustment settings can be stored up to 50 sets, 5 sets for Mode1 to Mode 5 are
stored into the projector and 45 sets for ExMode6 to ExMode50 are stored into the network
unit..