Fisher PJ-Net - Manual (Page 46)

46
Chapter 4 Controlling the Projector
Save an image adjustment value
1
Decide your desired image adjustment
value through the image adjustment
pages “1” to “3”.
2
Display the page “3” and select the
desired image number with the pull-
down menu of the Save Adjustment.
3
Register by clicking Set button.
To restore the adjustments, click Reset
button.
The Image1 to Image4 are for the user preset modes to store the image adjustment.
The Original Mode represents the mode that user preset mode Image1 to Image4 is
created from the predefined image modes Standard, Real or Cinema.
Load an image mode
Display the page “1” and select a set to
load with the pull-down menu button of
the Image and click Set button.