Fisher PJ-Net - Manual (Page 44)

44
Chapter 4 Controlling the Projector
System Adjustment
This function is to select the color system of video signal or scanning sys-
tem of component signal input to the projector. Select a system with the
radio buttons to match the color system or scanning system of input
source, and then click Set button. The displayed systems are switched according to
the input mode.
✐ These selections will not appear when the source mode is selected to the computer mode.
Available selection when the VIDEO/S-VIDEO input
Available selection when the Y, Cb/Pb, Cr/Pr input
Item Description
Color System ....Selects a color system of the
input video signal.
AUTO ................It automatically switches to the
color system of the input sig-
nal.
Item Description
System ..............Selects a scanning system of
the input component signal.
AUTO ................It automatically switches to the
scanning system of the input
signal.