Fisher PJ-Net - Manual (Page 87)

87
Network Unit
OWNER’S MANUAL
ENGLISH *1 This product will restart automatically when “Port” or “Serial Control” is changed and it
takes about 40 seconds.
*2 The reserved port numbers are http (80), ftp (21), telnet (23), etc. The port no. 10000 is
reserved to control the projector through the LAN port.
✐ Exclusive driver software for control of the external equipment is required. This product does
not provide any driver software. Please consult your local dealer.
✐ There are 2 types of RS-232C serial cable, Normal(Straight) and Reverse(Cross) type. Usually,
when connecting between this product and a projector or a computer, use Reverse type of
serial cable. When connecting DVD player etc., use Normal type.
Setting for controlling the equipment connected to the serial port from
the computer
Serial Control :Selects “External”
Port :Sets according to the com-
puter specified port no. Do
not use port no. 10000*
2 .
Other Settings :Sets according to the com-
munication condition of the
equipment
Setting for controlling the projector from the serial controller connect-
ed to the serial pot
Serial Control :Selects “Projector”
Port :Not specified. Do not use
port no. 10000* 2 .
Other Settings :Sets according to the com-
munication condition of the
serial controller
Setting fro controlling the projector from the computer through the
LAN port
Serial Control :Not specified
Port :Not specified
Other Settings :Not specified
* The port no. of the computer must be used with 10000.
Serial port setting