Main panel – Furuno CSH-5 MARK-2 User Manual
Page 10
4
Main Panel
4
6
8
2
0
10
4
6
8
2
0
10
4
6
8
2
0
10
4
6
8
2
0
10
4
6
8
2
0
10
4
6
8
2
0
10
NOISE LIM
AGC
2
1
3
OFF
VP
2
1
3
OFF
IR
CONTRAST
BRILL
DIMMER
AUDIO
POWER
ON
OFF
AGC
suppresses the echo tail of strong targets, e.g., the
seabed, for easy recognition of fish schools adjacent to the sea
bottom. Position "1" or "2" is the normal setting.
NOISE LIM
is used to reject noise which is displayed over the
screen in light blue. Position "3" is the normal setting.
VP
(Video Processor) adjusts the after-image of the echoes for
proper period; echoes are stretched in the radial direction. Set
at "1" for ordinary use.
IR
(Interference Rejector) rejects random noise and
interference caused by other echo sounders or sonars.
BRILL
adjusts brightness of the screen in eleven steps.
CONTRAST
adjusts the range of brightness between
highlights and shadows on the produced image.
DIMMER
adjusts panel (main panel and control box panel)
illumination.
AUDIO
controls the volume of the built-in loudspeaker for
monitoring a target echo appearing the bearing mark.
POWER
switches on and off the entire system.
COLOR SCANNING SONAR
Note:
When the power is turned off before retracting the transducer,
the transducer is automatically retracted. However, for safety
purposes, do not forget to retract the transducer before turn-
ing the power off.