Frymaster YSCF14G - Manual (Page 22)

YSCF14G SERIES GAS FRYERS
CHAPTER 4: COMPUTER OPERATION
4–1
NOTE: See the related YUM
computer manual (819-6133)
for programming instructions.
Launch Cook Cycle
1: Press a lane key.
2:SELP (Select Product) appears in the window above
the pressed button. The display changes to SEL PROD
in about five seconds.
3: Press the menu key for the desired product.
4: The display changes to the cooktime for the product
and then alternates between remaining cooktime and the
product name.
5: OUT appears at the end of the cook cycle.
6. Press Lane key to eliminate OUT display.
Turn Fryer ON
1: OFF appears in satus display
when controller is off.
2: Press ON/OFF button.
3:LO-- appears in status display.
4: Dashed lines appear in the status
display when the fryer is at setpoint.
B-in
1
B-in
SELP
Basic Operation
9:36
B-IN
Menu Keys
Press a menu key immediately after pressing a lane key to launch a cook cycle for the
desired product. The keys are also used to enter names of products. Each button, when
repeatedly pressed, accesses multiple letters or symbols. See example below.
Status Indicator
Displays OFF when fryer is off,
dashed lines when fryer is at
setpoint. Displays HI, LO and HOT
when the fryer is out of
temperature range.
Temperature Key
Press once for current
temperature, twice for setpoint.
Checkmark
Key
Used to enter
programming
modes.
Lane Keys
Press to initiate cook cycle. SELP appears in left display;
press a menu key immediately after pressing the cook key
to launch a cook cycle for the chosen product. Also used
to move through programming steps. Press blue key to
advance, yellow key to go back.
1 2 3 4 5 6 7 8 9 0
ON/OFF
ABC
1 2
DEF
3
GHI JKL MNO PQR STU VWX YZ
4 5 6 7 8 9
Overview
OUT
--LO--
---------
OFF 1
2
3
4
1
2
3
4
5
NOTE: To halt a cook cycle, press and hold the cook key under the displayed item for about five seconds.
Tatr Pies Cstk B-in B-out New
Trad
0
* blank space + 0