Frymaster 8SMS - Manual (Page 20)

5-3
Operator Troubleshooting Guides (Continued)
ON UNIT WITH
AUTOFILL, WATER DID
NOT SHUT OFF WHEN
COOKPOT WAS FULL.
Clean the water
level sensors.
Did the water
stop?
Yes
Problem resolved.
Add 1/8-cup of
baking soda to the
water in the
cookpot and stir.
Did the water
stop?
Mineral content of water is
insufficient for water sensor to
ground. Whenever cookpot is
refilled, add 1/8-cup of
baking soda.
Probable causes are a loose or
damaged wire on the upper water
level sensor, a failed water solenoid,
or a failed upper water level sensor.
Call FASC.
Yes
No
No