Mounting the fs-100 (macintosh) – FOCUS Enhancements DVCPRO50 User Manual
Page 110
Advertising
FS-100: Using with a Computer
92
FS-100 Portable DTE Recorder
Mounting the FS-100 (Macintosh)
Step 1:
Start the Mac computer and connect the FS-100’s
COMPUTER
I/O
port to the computer using a standard 6-pin to 6-pin FireWire
cable.
When mounted, the FS-100 should appear on the computer's
desktop as shown below:
The FS-100 appears as a FAT32 volume with a PC label.
Step 2:
Locate the FS-100 on the desktop and open it up.
Step 3:
Open the folder with the most recent date code (for example,
“20050127-110345-01”). It should look similar to the
following:
Before Connecting FS-100 to a Computer
If clips have been assigned to a Reel folder: perform an Organize
Reels before connecting the unit to a computer.
Advertising