FOCUS Enhancements DVCPRO50 - Manual (Page 27)

Quickstart
FS-100 Portable DTE Recorder 9
Back Index |
WW
This button returns the FS-100 to the beginning of the current clip when
in playback mode. Press this button twice in sequence to return the FS-
100 to the previous clip during playback. In
STOP mode, press this
button to return the FS-100 to the beginning of the previous clip.
Pause, STOP and Power OFF
While in the Home screen, and in any transport mode, press this button
to Pause the FS-100. Press it again to stop the FS-100. Refer to the
section, Setup Screens on page 48 for more information.
To power off the FS-100, hold down the STOP button for three
seconds. During Power OFF and if the Alarm function is ON , the
FS-100, makes an audible beep indicating it is turning off.
Forward Index XX|
Use this button to skip forward to the next clip in STOP and PLAY
modes.
Fast Forward and Reverse
Pressing the Forward Search button multiple times results in increases in
the search speed, i.e. fast forward. This mode works both in forward and
reverse functions. For instance, if you are in 10X FF speed and you press the
Back Search button once, the FS-100 is now in 2X FF mode. In addition, this
applies to backward search speeds. The default speed resolution is as
follows (NTSC and PAL, have slightly different multiples for < 1X):
• Reverse: -30X, -10X, -2X, -1X (reverse play), -1/2X(-15fps), Still.
• Forward: Still, +1/2X (+15fps), +1X (play), +2X, +10X, +30X
Fast Forward and Reverse Search Compatible Camcorders
In Forward and Reverse Search modes, some camcorders do not display
video when played-back from an external device, such as the FS-100.
Using Back Index with Short Clips
When using Back Index with short clips, it is first necessary to place the
FS-100 in STOP mode.