Connecting a fs-100 to a dv/hd camcorder – FOCUS Enhancements DVCPRO50 User Manual
Page 39
Quickstart
FS-100 Portable DTE Recorder
21
Connecting a FS-100 to a DV/HD
Camcorder
Before performing this procedure, make sure you have installed and
charged the battery, see Installing / Removing the Battery Pack on
page 19.
Step 1:
Connect the supplied Firewire cable to the
DV I/O
connector on
the top of the FS-100.
Step 2:
Locate the FireWire/DV/iLink (or similar) connector on your
video camera. It is located in different places depending upon the
brand of camera. If you are unclear of its location, consult your
video camera manual.
Step 3:
Connect the other end of the FireWire, 1394, cable to your video
camera.
Step 4:
Turn on the video camera.
Step 5:
Turn on the FS-100.
FS-100 Supplied with 4-pin to 6-pin FireWire Cable
A 4-pin to 6-pin FireWire, 1394, cable is provided with the
FS-100.
HVX200 FireWire Connector
The FireWire connector on the HVX200 is located on the right side
of the camera, behind the tape transport. For more information,
refer to the HVX200 documentation.