Set time and date – FOCUS Enhancements DVCPRO50 User Manual
Page 43
Quickstart
FS-100 Portable DTE Recorder
25
Set Time and Date
Step 1:
Press the
Right
navigation button several times until the Setup
display appears on the screen as shown below:
Step 2:
Use the
Down
navigation button to highlight the date and press
the
Right
navigation button to access the Set Date screen.
Step 3:
Use the
Up
and
Down
navigation buttons to change the
highlighted value. Use the
Right
and
Left
navigation buttons to
highlight the Month, Day, and Year.
Step 4:
When complete, press the right-most Function button indicated
as
BACK
on the screen. The new date will be indicated on the
Setup Screen.
Date and Time Must Be Set
The date and time must be set because they are used in the FS-100 file
naming function.
SETUP
09 / 15 / 05
11 : 21 : 13
V 1 . 0. 0
-LCDLIGHT ON
SET DATE
09
/ 15 / 05
MM / DD / YY
BACK