916 step 8 – installing the handlebars, Step 7 – attaching the monitor, Program profiles – Fitness Quest 1175e User Manual

Page 10

Advertising
background image

9

16

STEP 8 – Installing the Handlebars

a) Connect the Vertical Tube Pulse Wire to

the Left Handlebar Pulse Sensor Wire.

b) Install the Left Handlebar into the Left

Swing Arm. Make sure to align the Bolt
Holes of the Left Handlebar with the Bolt
Holes of the Left Swing Arm.

c) From the rear of the Elliptical, insert the

two Carriage Bolts through the two holes.

d) Install a Curved Washer, a Spring Washer,

and then an Acorn Nut onto each Bolt.
Make sure each Acorn Nut is tightened.

e) Connect the Vertical Tube Pulse Wire with

the Right Handlebar Pulse Sensor Wire.

f) Install the Right Handlebar into the Right

Swing Arm. Make sure to align the Bolt
Holes of the Right Handlebar with the
Bolt Holes of the Right Swing Arm.

g) From the rear of the Elliptical, insert the two

Carriage Bolts through the two holes.

h) Install a Curved Washer, a Spring Washer,

and then an Acorn Nut onto each Bolt.
Make sure each Acorn Nut is tightened.

Figure 8 – Install Handlebars

STEP 7 – Attaching the Monitor

a) Remove the Bolts from the rear

of the Monitor (see 7a).

b) Put the Wires from the rear of the

Monitor into the large hole of the
Monitor Plate. Then insert the Bolts
through the Monitor Plate into the
Monitor.

c) Connect the Monitor Wire to the

Vertical Tube Wire.

d) Connect the Monitor Pulse Wires to

the Vertical Tube Pulse Wires.

e) Insert the Monitor Plate into the

Vertical Tube. Align the Bolt holes
after inserting Monitor Mount (see 7b).

f) Insert and tighten two Phillips Bolts

into the holes.

Figure 7a & b – Install Monitor

stationary

bar

monitor

monitor

monitor

mount

monitor plate

monitor pulse wires

monitor wire

M5 x 16mm phillips bolt

M5 x 10mm phillips bolt

vertical tube wire

vertical tube pulse wires

right swing

arm

right

handlebar

M8 x 50mm

carriage bolt

pulse sensor wire

vertical tube

pulse wire

vertical tube

pulse wire

pulse sensor

wire

left

handlebar

left swing arm

M8 curved

washer

M8 acorn

nut

M8 spring

washer

7a

7b

PROGRAM 1

VALLEY

PROGRAM 3

FAT BURN

PROGRAM 4

RAMP

PROGRAM 5

FITNESS TEST

PROGRAM 6

ROTATING

PROGRAM 2

MANUAL

PROGRAM 9

PROGRAM 12

TARGET HEART RATE

85% HEART RATE

PROGRAM 8

PROGRAM 10

60% HEART RATE

PROGRAM 11

75% HEART RATE

INTERVALS

PROGRAM 7

BODY FAT PROGRAM

Program Profiles

FRONT

REAR

Advertising