Fujioh FDR-4200 - Manual (Page 6)

1. PREPARATION
1 According to the conditions where the
range hood is installed, determine
whether it will discharge vertically or
horizontally (7" Round duct). For vertical
or horizontal discharge, run duct work
between the hood location and a roof
cap or wall cap. For the best result in
either directions, use a minimum number
of transitions and elbows. Be sure to
attach a roof cap or wall cap to avoid
leaking rain in the end.
NOTE: FDR-4200D is for horizontal
discharge only.
2 Use diagrams below, for proper placement of ductwork and electrical cutout in the
wall or ceiling.
NOTE: Refer also to “SIZE & DIMENSIONS” on page 5.
INSTALLATION
WARNING : • If the range hood is not installed properly, it could become
detached and fall off.
• Ensure that the metal duct does not touch other metal housing
materials, otherwise fire or electric shock could result.
;
7" Round Ducting
6