Fujioh FDR-4200 User Manual
2. RANGE HOOD MOUNTING
Referring to “SIZE & DIMENSIONS” on
page 5, insert 2 supplied washer head
wood screws into the mounting wall (for
the left and right hangers). Allow about
¼" space between the wall and
screwheads for hanging the body.
To mount the range hood, hook the
temporary fixing holes of the hangers on
the screws, slide the body downward,
then tighten the screws.
Insert 2 more washer head wood
screws in the holes of the body, and
tighten them firmly.
Connect duct and duct joint, then
make the duct joint secure and air tight
using non-flammable tape such as duct
tape, etc. (not supplied)
Duct Tape, etc.
: The range hood is quite heavy (FDR-4200D: 35kg, FDR-
4200: 28kg), so be careful not to injured during mounting