Timer recording, 36 en 36 en, Use [ k / l ] to select a recording mode – FUNAI ZC350MS8 User Manual
Page 36: Auto recording mode select, Press [ok] when all items are entered, Press [standby-on y y ] to set a timer programming
36
EN
36
EN
4
Use [K / L / s / B] or [the Number
buttons] to enter the start and end
time, then press [B].
1/1
New
Program
Date
JAN/02
CH
DTV125. 1
Mode
SP
SP
2 : 00
Start
12 : 00AM
End
- - : - -
5
Use [K / L / s / B] to select analog
(“- - -”) / digital (“DTV”) mode or
external input (E1 / E2), then press
[B].
e.g.) external input mode
1/1
New
Program
Date
JAN/02
CH
E1
Mode
SP
SP
1 : 00
Start
12 : 00AM
End
1 : 00AM
To record from external input (e.g., cable/
satellite box), select E1 or E2.
Use [K / L] to select the channel number to
record.
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on page 37
for more details.
e.g.) analog mode
1/1
New
Program
Date
JAN/02
CH
10
Mode
SP
SP
1 : 00
Start
12 : 00AM
End
1 : 00AM
e.g.) digital mode
1/1
New
Program
Date
JAN/02
CH
DTV125. 1
Mode
SP
SP
1 : 00
Start
12 : 00AM
End
1 : 00AM
6
Use [K / L] to select a recording
mode.
1/1
New
Program
Date
JAN/02
CH
DTV125. 1
Mode
SP
SP
1 : 00
Start
12 : 00AM
End
1 : 00AM
Refer to “Recording Mode” on page 31.
• You can check the remaining recordable space
of the disc when you select the recording mode.
Date
JAN/02
CH
DTV125. 1
Mode
SP
SP
1 : 00
Start
12 : 00AM
End
1 : 00AM
Auto recording mode select...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
1/1
New
Program
Date
JAN/02
CH
DTV125. 1
Mode
Auto
Auto
0 : 00
Start
12 : 00AM
End
1 : 00AM
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short when the available
recording space of the disc is too limited.
7
Press [OK] when all items are
entered.
Your program setting will be stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
• To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 37.
8
Press [STANDBY-ON y
y
] to set a timer
programming.
TIMER REC indicator will light up on the front
panel.
TIMER RECORDING
E7H51UD.indd 36
E7H51UD.indd 36
2007/02/19 18:23:34
2007/02/19 18:23:34