FUNAI ZC350MS8 - Manual (Page 87)

87 EN 87 EN
Function Setup
Others
Editing
Playback
Recording
Basic Setup
Connections
Introduction
Español
TROUBLESHOOTING
Symptom Remedy
Playback
The disc does not play back. • No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled side facing up.
• The disc is not correctly inserted.
• The unit cannot play back certain discs (such as a CD-ROM) (page 46).
• The region code on the DVD-video does not match the unit (page 46).
• Moisture has condensed inside the unit. Remove the disc and leave the unit
turned on for about 2 hours until the moisture evaporates (page 4).
• If the disc was recorded on another recorder, the unit cannot play back the
disc if it was not finalized.
Discs recorded on this unit
cannot be played back on other
DVD players. • If you are using DVD+R, DVD-RW/-R disc, please ensure you finalized the disc
after recording (page 44).
The disc does not start playback
from the beginning. • Resume playback was activated (page 53). Press [STOP C] twice.
• You have inserted a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first insert.
The unit starts playing back the
disc automatically. • The DVD-video features an auto playback function.
Some functions such as stop,
search, or slow-motion playback
cannot be performed. • Depending on the disc, you may not be able to do some of the operations.
Refer to the manual supplied with the disc.
The language for the sound track
cannot be changed. • The title does not have the multilingual audio tracks.
• The DVD-video prohibits the changing of the language for the sound track.
The subtitle language cannot be
changed or turned off. • Multilingual subtitle are not recorded on the DVD-video.
The angles cannot be changed. • Multi-angles are not recorded on the DVD-video being played back.
• The angle-change operation is whenever possible as long as the disc contains
a multi-angle portion. Actual change will be performed when the portion has
come up.
• The DVD-video prohibits changing angles.
• Try changing the angle using the DVD-video’s menu.
Recording / Timer recording / Editing
The channel cannot be changed
from the channel you are
recording. • Set the TV’s input to “TV.”
Nothing was recorded even
though you set the timer setting
correctly. • There was a power failure during recording.
• The unit’s internal clock stopped due to a power failure that lasted for more
than 30 seconds. Reset the clock (pages 23- 24).
• The program contains copy protection signals that restricts copying.
• The timer setting overlapped with another setting that has priority.
Recording does not stop
immediately after you press
[STOP C]. • It may take a few seconds for the unit to input disc data before recording
stops.
Timer recording is not complete
or did not start from the
beginning. • The timer setting overlapped with another setting that has priority (page 38).
• Disc space was not enough.
E7H51UD.indd 87 E7H51UD.indd 87 2007/02/19 18:23:53 2007/02/19 18:23:53