FUNAI ZC350MS8 - Manual (Page 8)

8 EN 8 EN
FUNCTIONAL OVERVIEW
(*) The unit can also be turned on by pressing these buttons.
1. Disc tray
Place a disc when opening the disc tray.
2. OPEN/CLOSE A button*
Press to open or close the disc tray.
3. CHANNEL / buttons
Press to change the channel up and down.
4. STOP C button
Press to stop playback or recording.
5. PLAY B button*
Press to start or resume playback.
6. RECORD I button
Press once to start a recording. Press repeatedly to
start one-touch timer recording.
7. STANDBY-ON y y button
Press to turn the unit on and off.
If timer programmings have been set, press to set the
unit in timer-standby mode.
8. AUDIO input jacks (E2)
Use to connect external device with a RCA audio
cable.
9. VIDEO input jack (E2)
Use to connect external device with a RCA video
cable.
10. S-VIDEO input jack (E2)
Use to connect the S-video output of external device
with an S-video cable.
11. Infrared sensor window
Receive signals from your remote control so that you
can control the unit from a distance.
12. TIMER REC indicator
Lights up when timer programming is set.
Lights up during one-touch timer recording.
Flashes when all timer programmings have been
finished, or when a program cannot be performed by
some reason.
13. RECORD indicator
Lights up when recording function works.
14. POWER indicator
Lights up when power is on.
Front Panel
9 8 14 13 12 11 10
1 2* 3 4 6 7 5*
E7H51UD.indd 8 E7H51UD.indd 8 2007/02/19 18:23:23 2007/02/19 18:23:23