FMI (V)S36 User Manual

Page 2

Advertising
background image

www.fmiproducts.com

111026-01G

2

saFety

WARNING: Do not install a

fireplace insert in this box unless

the manufacturer's instructions

with the insert specifically state

this fireplace has been tested for

use with this insert.

FOR YOUR SAFETY

• Do not store or use gasoline

or any other flammable vapors

or liquids in the vicinity of this

or any other appliance.

• Due to high temperatures, the

appliance should be located

out of traffic and away from

furniture and draperies.

• Do not place clothing or other

flammable materials on or near

the appliance.

• Never leave children unat-

tended when a fire is burning

in the fireplace.

WARNING: Use solid wood

or processed solid fuel firelogs

only. When processed wood fuel

fire logs are used, do not poke or

stir the logs while they are burn-

ing. Use only fire logs that have

been evaluated for the application

in fireplace and refer to fire log

warnings and caution markings

on packaging prior to use.

This fireplace is not intended to be

used as a substitute for a furnace

to heat an entire home. Use for

supplemental heat only.

WARNING: Improper

installation, adjustment,

alteration, service or

maintenance can cause

injury, property damage

or loss of life. Refer to this

manual for assistance or

additional information.

Consult a qualified install-

er or local distributor.

IMPORTANT: Check local codes

before installing this fireplace.

Before beginning installation of this fireplace,

read these instructions through completely.
• This FMI PRODUCTS, LLC fireplace and

its components are safe when installed

according to this installation manual.

Unless you use FMI PRODUCTS, LLC

components, which have been designed

and tested for the fireplace system, you

may cause a fire hazard.

• The FMI PRODUCTS, LLC warranty will

be voided by and FMI PRODUCTS, LLC

disclaims any responsibility for the following

actions.
a. Modification of the fireplace, com-

ponents, doors, air inlet system and

damper control.

b. Use of any component part not manufac-

tured or approved by FMI PRODUCTS,

LLC in combination with a FMI PROD-

UCTS, LLC fireplace system.

Proper installation is the most important step

in ensuring safe and continuous operation of

fireplace. Consult the local building codes as

to the particular requirements concerned with

the installation of all factory built fireplaces.

table OF cOntents

Safety .................................................................. 2

Specifications ...................................................... 3

Fireplace Installation............................................ 4

Venting Installation .............................................. 6

Optional Gas Line Installation.............................11

Operation and Maintenance Guidelines ............ 12

Parts .................................................................. 14

Technical Service............................................... 17

Accessories ....................................................... 17

Advertising