Frymaster HCP - Manual (Page 15)

HCP
5-1
5 Opening the HCP Software
Turn the Palm Pilot ON and tap on
the software menu item (likely to
be All) displayed in the right top
corner.
A drop-down menu lists groupings
of software and other functions.
Highlight Utilities by tapping on
it. See figure 1.
The HCP icon shows on the
screen. Tap it.
The Setup screen is displayed. See
figure 2.
5.1 Entering A Password/Choosing Language
The HCP software is provided with only one food item, chicken.
Additional menu items must be added by the end user. Adding,
editing or removing items in the Food Library and changing the
temperature display require a password. Tap the Key icon in the top
center of the HCP software. Upper arrow in Figure 1. The Security
Manager screen appears.
Tap the abc icon in the bottom left of the screen. Lower arrow in
Figure 1.
Use the keyboard screen that appears to enter the required password
(manager) and tap OK.
The Security Manager screen reappears with the password in place.
Tap OK.
A Current Security screen appears. Click OK.
Tap the Language button and choose English as the language in the
Localization dialog box. Click Quit.
With the proper password and language entered, menu items can be
entered and edited.
Exit the HCP software by tapping the House icon on the Palm
screen, which will cause it to default to the Cook password setting
upon restart.
Figure 1: Entering a password
allows new products to be added
and existing products to be
edited.
Figure 1: Select the HCP
software from the Palm's Utilities. Figure 2: HCP software opens
to its Setup screen..
Figure 2: Set the Language
selection from Default to English
after tapping the Language
button.