Fender TB-1200 User Manual
Page 9
fender.com
9
TYPE:
PR 693
PART NUMBERS:
TB-1200 HEAD:
22-45700-000 (120V, 60Hz) USA,
22-45701-000 (110V, 60Hz) TW,
22-45703-000 (240V, 50Hz) AUS,
22-45704-000 (230V, 50Hz) UK,
22-45705-000 (220V, 50Hz) ARG,
22-45706-000 (230V, 50Hz) EUR,
22-45707-000 (100V, 50Hz) JPN,
22-45709-000 (220V, 60Hz) ROK
TB-600 HEAD:
22-45800-000 (120V, 60Hz) USA,
22-45801-000 (110V, 60Hz) TW,
22-45803-000 (240V, 50Hz) AUS,
22-45804-000 (230V, 50Hz) UK,
22-45805-000 (220V, 50Hz) ARG,
22-45806-000 (230V, 50Hz) EUR,
22-45807-000 (100V, 50Hz) JPN,
22-45809-000 (220V, 60Hz) ROK
TB-600 COMBO:
22-46000-000 (120V, 60Hz) USA,
22-46001-000 (110V, 60Hz) TW,
22-46003-000 (240V, 50Hz) AUS,
22-46004-000 (230V, 50Hz) UK,
22-46005-000 (220V, 50Hz) ARG,
22-46006-000 (230V, 50Hz) EUR,
22-46007-000 (100V, 50Hz) JPN,
22-46009-000 (220V, 60Hz) ROK
POWER REQUIREMENT:
1800W (TB-1200); 900W (TB-600)
PRE AMP:
INPUT IMPEDANCE:
>820kΩ (Front Panel Input); 10kΩ (Rear Panel Input)
OUTPUT IMPEDANCE:
220Ω balanced (@ PRE AMP OUTPUT jack)
SENSITIVITY:
15mV @ 100/1000Hz for 1.0V RMS at Pre Amp Output
(–9dB Pad: out, Volume: 10, Bass: 10, Deep Boost: off, Mid: 10,
Treble: 10, Tube Overdrive: disabled, Vari–Q™: disabled,
Room Balance: flat, Master Volume: 10, Effects-Trim: 0)
TONE CONTROLS:
BASS:
10dB range @ 40Hz (Mid: 5, Treble: 5)
MID:
15dB range @ 400Hz (Bass: 5, Treble: 5)
TREBLE:
9dB range @ 4kHz (Bass: 5, Mid: 5)
VARI-Q™ FREQUENCY:
70Hz–2.0kHz
VARI-Q™ LEVEL:
±15dB @ Vari-Q™ frequency
ROOM BALANCE:
±6.0dB, center frequency: 375Hz
BALANCED LINE OUTPUT:
IMPEDANCE:
50Ω
MAXIMUM OUTPUT:
+26dBu, 600Ω
EFFECTS LOOP:
SEND IMPEDANCE:
<600Ω balanced
RETURN IMPEDANCE:
>10kΩ balanced
NOMINAL LEVEL:
-10dBV / +4dBu switchable
POWER AMP:
INPUT IMPEDANCE:
>30kΩ balanced (@ Power Amp Input Jack)
INPUT SENSITIVITY:
1.0V RMS (0dBV) for full power
POWER OUTPUT:
1200W RMS into 2Ω @ 0.2%THD (TB-1200), 1kHz
600W RMS into 4Ω @ 0.2%THD (TB-600), 1kHz
TUBE COMPLEMENT:
Two 12AX7WC (0013341000)
FOOTSWITCH:
TBFS-4 (0070683000)
SPEAKER COMPLEMENT (TB-600 COMBO):
DRIVERS:
2x10" 16Ω cast frame, Eminence®
HORN:
1 Foster 8Ω Horn (with attenuator)
HORN FUSE:
F2A, 250V
DIMENSIONS:
HEIGHT:
3.5 in (8.9 cm) HEAD;
22.5 in (57.2 cm) COMBO
WIDTH:
19.0 in (48.3 cm) HEAD;
23.5 in (59.7 cm) COMBO
DEPTH:
15.0 in (38.1 cm) HEAD;
16.5 in (41.9 cm) COMBO
WEIGHT:
34 lb (15.4 kg) TB-1200 HEAD;
32 lb (14.5 kg) TB-600 HEAD;
102 lb (46.3 kg) TB-600 COMBO
Product specifications are subject to change without notice.
Specifications