FUJITSU MAS3367 User Manual
FUJITSU Hardware
Advertising
Table of contents
Document Outline
- Front Cover
- FOR SAFE OPERATION
- Revision History
- Preface
- Contents
- CHAPTER 1 Command Processing
- CHAPTER 2 Data Buffer Management
- CHAPTER 3 Command Specifications
- 3.1 Control/Sense Commands
- 3.1.1 TEST UNIT READY (00)
- 3.1.2 INQUIRY (12)
- 3.1.3 READ CAPACITY (25)
- 3.1.4 CHANGE DEFINITION (40)
- 3.1.5 MODE SELECT (15)
- 3.1.6 MODE SELECT EXTENDED (55)
- 3.1.7 MODE SENSE (1A)
- 3.1.8 MODE SENSE EXTENDED (5A)
- 3.1.9 REZERO UNIT (01)
- 3.1.10 START/STOP UNIT (1B)
- 3.1.11 RESERVE (16)
- 3.1.12 RESERVE EXTENDED (56)
- 3.1.13 RELEASE (17)
- 3.1.14 RELEASE EXTENDED (57)
- 3.1.15 REQUEST SENSE (03)
- 3.1.16 LOG SELECT (4C)
- 3.1.17 LOG SENSE (4D)
- 3.1.18 PERSISTENT RESERVE IN (5E)
- 3.1.19 PERSISTENT RESERVE OUT (5E)
- 3.1.20 REPORT LUNS (A0)
- 3.1.21 REPORT DEVICE IDENTIFIER (A3)
- 3.1.22 SET DEVICE IDENTIFIER (A4)
- 3.2 Data Access Commands
- 3.3 Format Commands
- 3.4 Maintenance, Diagnostic Commands
- 3.1 Control/Sense Commands
- CHAPTER 4 Parameter Data Formats
- 4.1 Mode Parameters
- 4.1.1 Read/Write error recovery parameters (page code = 1)
- 4.1.2 Disconnect/reconnect parameters (page code = 2)
- 4.1.3 Format parameter (page code = 3)
- 4.1.4 Drive parameter (page code = 4)
- 4.1.5 Verify error recovery parameters (page code = 7)
- 4.1.6 Caching parameters (page code = 8)
- 4.1.7 Control mode parameters (page code = 0A)
- 4.1.8 Notch parameter (page code = 0C)
- 4.1.9 Informational exceptions control page (page code = 1C)
- 4.1.10 Additional error recovery parameters (page code = 21)
- 4.2 Log Parameters
- 4.2.1 Supprot log page (X'00')
- 4.2.2 Buffer overrun / underrun page (X'01')
- 4.2.3 Write error count page (X'02')
- 4.2.4 Read error count page (X'03')
- 4.2.5 Verify error count page (X'05')
- 4.2.6 Non-medium error count page (X'06')
- 4.2.7 Temperature page (X'0D')
- 4.2.8 Start-stop cycle counter page (X'0E')
- 4.2.9 Application client page (X'0F')
- 4.2.10 Self-test result page (X'10')
- 4.2.11 SMART status page (X'2F')
- 4.2.12 SMART data page (X'38')
- 4.1 Mode Parameters
- CHAPTER 5 Sense Data Error Recovery Methods
- CHAPTER 6 Disk Media Management
- Glossary
- Acronyms and Abbreviations
- Index
- READER’S COMMENT FORM
- Back Cover