FUJITSU M3092DC - Manual (Page 48)

3-14 M3092DC Image Scanner Operation Guide
UP
Down
Function
Duplex
Send to
Scan
Function button
Duplex button
Send to button
Copy density dial
Function No. display panel
! Key point
You can control the copy count and density by using Copy
screen. In this case, display C on the Function No. display panel
by using the Function button and press the Send to button. For
details, see the Help information about Send to.
! Notes
The entire surface of a document may not be printed, depending
on the printable area of the printer. When printing the entire
surface of a document, perform the following operations:
a) Display the Send to screen. Display C on the Function No.
display panel by pressing the Function button, then press the
Send to button.
b) Activate the check box "Enlarge/Reduce to fit Print Area"
on the Copy screen and click "Copy".
This specification becomes valid for subsequent copy
operations. To cancel this option, uncheck
"Enlarge/Reduce to fit Print Area".
When "Enlarge/Reduce to fit Print Area" is checked, the printing
time may be extended.