FUJITSU M3092DC - Manual (Page 57)

M3092DC Image Scanner Operation Guide 4-9
4.4.2 Procedure for Replacing the Pad
Replace the pad through the following procedure:
1) Remove any documents from the document support.
2) Open the automatic document feeder by pulling it toward you while
raising the cover open lever.
3) Remove the pad.
Step 1: Push the pick arm in the automatic document feeder in the
arrow direction.
Step 2: Pull out the pad by using such as a ballpoint pen at both
ends (a and b) of the pad.
a
b
Step 1
Picking arm
Pad
Step 2
Pick arm