Faria Instruments NMEA2000 - Manual (Page 10)

Page 7
Edit Mode
The “Edit” mode is used to adjust or set the values of numerous functions and
options in the MG2000. The procedure below specifies the steps to be taken in the
“Edit” mode to adjust / set each option.
To enter “Edit” mode, press “Mode” and “Up” buttons while in “Normal” mode.
To return to “Normal” mode, press “Mode” button once while in “Edit” mode.
Functions that are set or adjusted in the “Edit” mode.
1. Select Default Screen
2. Local Fuel Configuration
3. Fuel Totalizer Configuration
4. Organize User Screens
5. Select Gauge Range
6. Select Data Sources
7. Calibrate Trim Sender
8. Select Display Units
9. Fuel Tank Calibrate
10. Low Fuel Alarm
11. Select Self Test
12. Software ID & Revision
13. Reset To Defaults
14. Depth Sounder Warnings