Faria Instruments NMEA2000 - Manual (Page 15)

Page 12
Press and hold “Up” and “Down” for 2 seconds to set “TFuel
Tank Full.”
Automatically sets the total fuel available to the TFuel
tank size selected by the user and returns to “Fuel Totalizer
Config” menu.
Press “Up” or “Down” to select another function or “Mode”
to return to “Edit” mode.
Total Amount of Fuel
1 Total
Amount
of Fuel
2
3
NOTE: If the known combined amount of fuel is in the
fuel tanks but they are not full, this function can be used
to indicate the amount of fuel available. The “TFuel Left”
function will then use the amount of fuel entered to calculate
the “TFuel Left.”
Press and hold “Up” and “Down” for 2 seconds to select
“Total Amount of Fuel
Press “Up” or “Down” to select another function or “Mode”
to return to “Edit” mode.
Press “Up” or “Down” to set the amount of fuel known to be
in the fuel tanks. Adjust until the displayed volume matches
the known amount of fuel in the tanks.
1
Fuel
Amount
XXX
2
3
When the volume is correctly set, Press and hold “Up” and
“Down” for 2 seconds to save the value and return to the
“Fuel Totalizer Config” menu.
Press “Up” or “Down” to select another function or “Mode”
to return to “Edit” mode.
Select “TFuel Tank Size”
1 Select
TFuel Tank
Size
2
3
Press and hold “Up” and “Down” for 2 seconds to enter the
“Select TFuel Tank Size” menu or press “Mode” to return to
“Edit” mode.
Select “Standard TFuel Tank Size”
1 Select
Standard
TFuel Tank
Size
2
3
4
Press and hold “Up” and “Down” for 2 seconds to enter
the “Select Standard TFuel Tank Size” menu. Press “Up”
or “Down” to select a different function or press “Mode” to
return to “Edit” mode.