Faria Instruments NMEA2000 - Manual (Page 7)

Page 4
Default Screen “2”
Fuel Left
41˚21N 072˚06W
Faria
KLine
mini
Gateway
PGFXXX
7.3
GPH
3650
RPM
65˚
F
93.5
Miles
19.3
PSI
47
Gal
Fuel Used
17.5
Gal
Fuel Inst
11.6
Gal
Trip
20.1
PSI
Oil Pressure
On Off
Trim Sync
P S
Fuel Left
Displays the quantity of fuel remaining
in the fuel tank based on the original
quantity of fuel in the tank when full and
the amount of fuel used based on the
GPH from the engine ECU and the time
spent at each GPH. Fuel tank size and
reset are available in the “Edit” mode.
Fuel Used
Displays the amount of fuel used since
reset based on the GPH from the engine
ECU and the time spent at each GPH.
Fuel Inst
Displays the current, instantaneous, fuel
flow in GPH.
Default screen “3”
Volts
41˚21N 072˚06W
Faria
KLine
mini
Gateway
PGFXXX
7.3
GPH
3650
RPM
65˚
F
93.5
Miles
19.3
PSI
13.6
Volts
Sen Trim
17.5
Gal
Water Press
20
PSI
Trip
20.1
PSI
Oil Pressure
On Off
Trim Sync
P S
Volts
Displays system voltage as received
from the ECU.
Trim
Analog input. Displays setting of the
analog trim sender. Sender type can be
selected in “Edit” mode.
Water Press
Analog input. Displays engine water
pressure as supplied to the pressure port
on the tachometer. Pressure gauge dial
range can be selected in “Edit” mode.
Default screen “4”
RPM
41˚21N 072˚06W
Faria
KLine
mini
Gateway
PGFXXX
7.3
GPH
3650
RPM
65˚
F
93.5
Miles
19.3
PSI
3400
Sen Fuel
17.5
Gal
Oil Pressure
40
PSI
Trip
20.1
PSI
Oil Pressure
On Off
Trim Sync
P S
RPM
Display the RPM of the engine as
reported from the ECU.
Sen Fuel
Analog input. Display setting of the
analog fuel level sender. This display is
the equivalent of a standard fuel gauge
and should be used as the reference for
the fuel remaining.
Each filled block represent 1/8 of a tak
and when the fuel tank is empty, only
empty blocks will be displayed. For best
accuracy, the fuel level sender should
be calibrated as described.
Oil Pressure
Displays oil pressure as received from
the ECU.
Default screen “5”
Fuel Used
41˚21N 072˚06W
ALARM
SCREEN
WILL DISPLAY
ENGINE
AND LOCAL
ALARMS WHEN
THEY OCCUR
7.3
GPH
3650
RPM
65˚
F
93.5
Miles
19.3
PSI
17.5
Gal
Trip
20.1
PSI
Oil Pressure
On Off
Trim Sync
P S
This screen displays fault conditions
based on engine data received from
the ECU or alarms based on internally
set alarm points. Engine alarms from
the ECU will be displayed as “Check