Faria Instruments NMEA2000 - Manual (Page 14)

Page 11
Press “Up” or “Down” to set the fuel tank size displayed on
the Screen to match your fuel tank size. Line 4 value will
adjust.
When set, Press and hold “Up” and “Down” for 2 seconds
to save the value.
1 Select
Other
Fuel Tank
XX
2
3
4
Press “Up” or “Down” to select a different function or press
“Mode” to return to “Local Fuel Config” menu.
Press “Up” or “Down” to select a different function or press
“Mode” to return to “Edit” mode.
Fuel Totalizer Config
1 Fuel
Totalizer
Config
2
3
Press and hold “Up” and “Down” for 2 seconds to choose
“Local Fuel Config.”
Press “Up” or “Down” to select another function.
Reset “TFuel Used”
1 Reset
TFuel
Used
2
3
Press and hold “Up” and “Down” for 2 seconds to reset
“TFuel Used” to zero (0).
Automatically resets total fuel used to zero and returns to
“Fuel Totalizer Config” menu.
Press “Up” or “Down” to select another function or “Mode”
to return to “Edit” mode.
Set “TFuel Tank Full”
1 Set
TFuel Tank
Full
2
3
NOTE: In order to use the “TFuel Left” function, the owner
must set this function when the fuel tank is filled or use the
set current amount of fuel below. In addition, if “Set TFuel
Tank Full” function is used, the “TFuel Tank Size” must be
set correctly to the size of the fuel tank in this application.
The computer will monitor fuel usage and calculate the fuel
left in the tank. This function does not replace the fuel level
function provided by the fuel sender and should be used
with caution.