Engine warnings, Alarm messages - from the engine ecu – Faria Instruments NMEA2000 User Manual
Page 32
Page 29
DEPTH DEEP
Displays “Depth Deep” warning.
Red LED blinks.
Horn “beeps.”
1
Depth
Deep
!
2
3
Press “Mode” to turn off LED, silence alarm horn, and
return to “Run” mode. Alarm will reactivate in 0.5 minutes
if not corrected but can continue to be deactivated as
required.
ENGINE WARNINGS
Any engine alarm except “Engine Emergency Stop”
Red LED blinks.
Horn “beeps.” (PGN 127489 Field 11 Bits 0-14)
1
CHECK
ENGINE
!
2
3
“Engine Emergency Stop” alarm.
Red LED on continuously.
Horn on continuously. (PGN 127489 Field 11 Bits 15)
1
ENGINE
EMERGENCY
STOP !
2
3
Press and hold “Up” and “Down” for 2 seconds to view
alarm messages.
Press “Mode” to silence alarm horn and return to “Run”
mode. LED will continue to function as stated until engine
alarm(s) is no longer sent by ECU.
Alarm Messages - From the Engine ECU
CHECK ENGINE
(PGN 127489 Field 11 Bits 0)
1
CHECK
ENGINE
!
2
3
OVER TEMPERATURE
(PGN 127489 Field 11 Bits 1)
1
HIGH
ENGINE
TEMP
2
3
LOW OIL PRESSURE
(PGN 127489 Field 11 Bits 2)
1
LOW
OIL
PRESSURE
2
3