FUJITSU DL6400 User Manual
Page 116
Changing Configuration Options
User’s Manual
8-35
SETUP MODE
To change printer configuration options, check that continuous forms
are loaded. Then do the following:
1. Enter setup mode.
Place the printer offline and then press FONT and MENU
simultaneously. Wait for the printer to stop printing and check that
the <<FUNCTION>> menu is printed.
2. Select CONFIG.
Repeatedly press LOCK to position the yellow arrow on the print
head beneath CONFIG. Press FONT to select the CONFIG
function and print the <TEAROFF> options.
3. Select an option.
Press LOCK to move the yellow arrow to select an option. Press
FONT to select the option and print the next item.
Important:
To print the previous item, press MENU.
4. Exit CONFIG.
Press ONLINE and reprint the <<FUNCTION>> menu.
5. Either select another function or exit setup mode, saving changes.
To exit setup mode and save changes, check that the yellow arrow
on the print head is positioned beneath SAVE&END. Then press
FONT or MENU.
<<FUNCTION>>
SAVE&END MENU1 MENU2 HARDWRE ADJUST CONFIG DEFAULT LIST SELF-TST HEX-DUMP
V-ALMNT GAP-ADJ
<TEAROFF> MANUAL AUTO
(GAP-ADJ is printed only with APTC installed.)
DL6400/6600 Book Page 35 Friday, July 31, 1998 11:42 AM