FUJITSU DL6400 - Manual (Page 206)

User’s Manual E-1
E
APPENDIX
USING THE
LCD/LED TYPE
CONTROL PANEL
Using the LCD/LED Type Control Panel
Two types of printer control panel are available: the light-emitting
diode (LED) lamp type and the liquid-crystal display (LCD) type.
With the LED lamp type control panel,
• Status or error information is represented by on/off states of the LED
lamps or, in some cases, by combinations of the LED lamps.
• Setup information is printed on paper.
• Button functions are determined for each button and for
combinations of two or more buttons.
With the LCD type control panel,
• Status or error information is represented by a combination of up to
48 characters, consisting of numerals, letters, and symbols, displayed
on the LCD screen.
• Setup information is displayed on the LCD screen.
• Button functions are displayed on the LCD, and the functions of
some buttons can be programmed by firmware.
The body of this manual describes operations and functions using the
LED type control panel. This appendix describes operations of the
LCD type control panel, focusing on
• Basic printer operations
• Setup menu operations
You use the printer control panel to control most printer operations. If
your printer is equipped with the LCD type control panel, read the
entire first section to familiarize yourself with this type of control
panel.
This appendix does not generally repeat the descriptions and
procedures that are the same as or similar to those for printers with the
LED type control panel. This appendix also does not describe
individual operations, but gives basic information necessary for
everyday printer operations using the LCD type control panel.
#E_AppendixE Page 1 Wednesday, September 2, 1998 10:05 AM