FUJITSU DL6400 - Manual (Page 224)

Using the Setup Menus
User’s Manual E-19
USING THE
LCD/LED TYPE
CONTROL PANEL
Using the EXIT FROM SETUP function or the ONLINE or NEXT
DISPLAY button
When you use the EXIT FROM SETUP function or press the
ONLINE or NEXT DISPLY button, the printer prompts you to
permanently or temporarily save changed options. Use these methods
when you want to place the printer offline after saving. Follow these
steps:
1. Be sure the printer is in setup mode with the menu
shown at the left displayed.
2. Press F1 until EXIT FROM SETUP appears un-
der Func. Then press F3 to execute the EXIT
FROM SETUP function. Alternatively, press
ONLINE or NEXT DISPLAY.
The prompt message shown at the right appears.
3. • To use the changed options temporarily press
F1. The save execution message shown at the
right briefly appears.
The changed options are now temporarily
saved.
• To use the changed options permanently press
F2. The save execution message shown at the
right briefly appears.
The changed options are now permanently
saved.
4. The original basic menu reappears, and you can
place the printer online.
Func.
↓
XXXXX
Item
↓
XXXXX
Option
↓
XXXXX
Func.
↓
Item
↓
Option
↓
GO
EXIT FROM SETUP
USE SAVE Not-exit
EXIT: Use temporarily?
NOTE: Values are lost
if power is turned off.
NOTE: Values have been
permanently saved.
Enter
setup <Menu>
MENU1 <Lock>
OFF
#E_AppendixE Page 19 Wednesday, September 2, 1998 10:05 AM