Fisher & Paykel DISHDRAWER DD603I - Manual (Page 11)

PANEL PREPARATION INSTRUCTIONS
STEP 5:
GROUNDING THE MOUNTING BRACKETS
STEP 6:
CONNECTING THE BADGE WIRES
WARNING!
Be sure the Product is not plugged in.
Important!
The Badge Isolator Board is an electrostatic sensitive device. Be sure
you are adequately grounded when connecting or disconnecting the
Badge by wearing an grounding strap or by grounding yourself to the
.
5
Plug the green Badge grounding wire onto a Mounting Bracket tab. Plug
the grounding wire from the Product onto the other Mounting Bracket tab.
WARNING!
Be sure the Product is not plugged in.
Connect the Badge plug to the top of the Badge Isolator Box.
WARNING!
The mounting bracket MUST be grounded.