Fisher & Paykel DISHDRAWER DD603I - Manual (Page 12)

PANEL PREPARATION INSTRUCTIONS
STEP 7:
FITTING THE PANELS TO THE PRODUCT
6
Fit the assembled Panel by sliding in an inwards and upwards motion. The
rubber seal between the Drawer and Panel must be kept in place.
Secure the Panel by inserting the pins on either side of
the Drawer. Be sure that the rib on the pin is vertical.
Important!
The airflow gap between the bottom of the door panel and adjacent
cabinetry must be
3 /
8
” (9mm) or drying problems and moisture
damage may occur.
INTEGRATED PANEL PREPARATION IS COMPLETE.
The Product is now ready to install. Refer to Product Installation
Instruction Sheet P/N 526607.
CUSTOMER CARE
www.usa.fisherpaykel.com
If you have any questions concerning the installation of
this
, please contact your Fisher & Paykel
Authorized Service Agent.
USA
Fisher & Paykel Appliances
27 Hubble
Irvine
CA 92618
Toll Free 1 888 9 FNP USA
1 888 9 367 872