Fisher & Paykel DISHDRAWER DD603I - Manual (Page 6)

R
PANEL PREPARATION INSTRUCTIONS
STEP 7:
FITTING THE PANELS TO THE PRODUCT
6
Fit the assembled Panels by sliding in an inwards and upwards motion.
The rubber seal between the Drawer and Panels must be kept in place.
Secure the Panels by inserting the pins on either side of
the Drawer. Be sure that the rib on the pin is vertical.
NOTE: Do not fit the Toe Kick Panel (or supplied Black
Prefinished Toe Kick) to the
R until the Product is in
the cavity.
Important!
The gap between doors must be 5 /
16
” (8mm) or drying problems and
moisture damage may occur.
INTEGRATED PANEL PREPARATION IS COMPLETE.
The Product is now ready to install. Refer to Product Installation
Instruction Sheet P/N 526607.
CUSTOMER CARE
If you have any questions concerning the installation of
this
R , please contact your Fisher & Paykel
Authorized Service Agent.
USA
Fisher & Paykel Appliances
27 Hubble
Irvine
CA 92618
Toll Free 1 888 9 FNP USA
1 888 9 367 872
www.usa.fisherpaykel.com