Faria Instruments SMARTCRAFT MG2000 - Manual (Page 31)

Page 25
Note: Ensure fuel tank is half full before continuing to the next
step.
Using the “Up” or “Down” buttons display “Calibrate Fuel Half Full”.
Press and hold the “Up” and “Down” buttons for 2 seconds to select
“Calibrate Fuel Half Full”.
Calibrate
Fuel
Half Full
Fill the tank to HALF full before setting this level.
The last line of the display shows the percentage of fuel being sent by
the fuel sender for the half full condition.
Press and hold the “Up” and “Down” buttons for 2 seconds to save
the half full calibration point. Press “Down” to go to the next section.
Fuel
Half Full
Input Fuel%
XX%
The screen returns to the “Calibrate Fuel Half Full” screen,
Calibrate
Fuel
Half Full
Press the “Mode” button to return to the “Edit” mode.
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Fuel
Tank
Calibrate
Fuel Tank Calibrate - Full
From the “Edit” mode, using the “Up” or “Down” buttons, select the
“Fuel Tank Calibrate” edit function.
Press and hold the “Up” and “Down” buttons for 2 seconds to select
the “Fuel Tank Calibrate”. Follow the instructions below.
Otherwise,
Press the “Up” or “Down” button to select another function or
“Mode” to return to “Normal” mode.
Fuel
Tank
Calibrate
Note: Ensure the fuel tank is FULL before continuing to the next
step.
Using the “Up” or “Down” buttons display “Calibrate Fuel Full”.
Press and hold the “Up” and “Down” buttons for 2 seconds to select
“Calibrate Fuel Full”.
Calibrate
Fuel
Full