FieldServer SIEMENS TIWAY I FS-8700-31 User Manual
Page 17
FS-8700-31
Siemens
TIWAY
I
Page
14
of
23
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
C40_REP_NM_CONFIG, Nm_Config,
0,
RDBC, PLC_01, Report_NM_Config,
16,
Scan_Interval
0s
The above map descriptor will continuously execute the indicated host adapter command and will store the
following parameter values in the data array “Nm_Config”:
Offset Parameter
0
Dipswitch 1 and 2 settings
1
Config flag ( 0 = Network Manager not configured, 1 = Network Manager configured )
2
Option 01 configuration value
3
Option 02 configuration value
4
Option 03 configuration value
5
Option 04 configuration value
6
Option 05 configuration value
7
Option 06 configuration value
8
Option 07 configuration value
9
Option 08 configuration value
10
Option 09 configuration value
11
Option 0A configuration value
12
Option 0B configuration value
13
Option 0C configuration value
14
Option 0D configuration value
15
Option 0E configuration value
4.4.6.5. Soft
Reset
Forces the UNILINK Host Adapter to do a software reset.
Map_Descriptor_Name, Data_Array_Name,
Data_Array_Offset, Function, Node_name, TIWAY_Host_Adapter_Cmd, Length
C41_SOFT_RESET, Cmd_Triggers,
0, AWT,
PLC_01,
Soft_Reset, 1
The above map descriptor will execute the indicated host adapter command once every time a value is written to
the data array “Cmd_Triggers” at offset 0.