Furuno CH-300 - Manual (Page 80)

4. ECHO SOUNDER MODE
4-4
4.4 Train Direction
The sounding beam may be directed toward fore, aft, port or starboard. Operate the TRAIN
control to choose sounding beam direction. Each setting on the control is an increment of 6
°.
The train indicator at the top of the screen shows training direction: 0 °, fore direction; 90°,
starboard direction; 180 °, aft direction, and 270°, port direction.
0
°
(360
°
)
→
6
° →
12
° →
18
° → ...
354
°
Train 0
°
Train 90
°
Train 180
°
Train 270
°
Train indicator and display
4.5 Choosing a Tilt Angle
The transducer can pointed directly toward the bottom or forward of the ship. Operate the
TILT
control to choose an appropriate tilt angle. The available tilt angle is 0 ° (horizontal
direction) to 90 ° (vertical) in increments of 1° . Chosen tilt angle appears at the top of the
display to the right of “T”.
4.6 Choosing a Picture Advance Speed
The picture advance speed determines how quickly the vertical scan lines run across the
screen, from right to left. When choosing a picture speed, keep in mind that a fast advance
speed will expand a fish school horizontally on the screen and a slow one will contract it.
1. Press
the FAST SCAN key to show the following dialog box.
ADVANCE
1/8 1/4 1/2 1/1 2/1
2. Press ◄ or ► (FAST SCAN key may also be used) to select a speed. The fractions in
dialog box correspond to the number of scan lines produced per transmission. For
example, “2/1” means two scan lines are produced per transmission.
3. Press the MENU key to close the dialog box. Note that the dialog box is automatically
closed if there is no control operation for about four seconds.