Menu operation, 1 com1 menu – Furuno CH-300 User Manual
Page 87
Advertising
5-1
5. MENU
OPERATION
This chapter provides menu operating information on menus not previously discussed:
COM1, COM2, PRESET (or SHORT-CUT, depending on the setting of CUSTOM KEY on
the SYSTEM SETTING 1 menu) and SYS (System) menu.
5.1 COM1
Menu
1. Press
the
MENU
key to open the menu.
2. Press
▲ to choose MENU, and then press ◄ to choose COM1.
TX POWER
MAX
PULSELENGTH
LONG
TX RATE
10
INT REJECT
OFF
AGC
OFF
: SELECT
: CHANGE
MENU: END
MENU
COM1
HORZ
VERT
ES
PRESET
SYS
COM2
AUDIO LEVEL
0
COM1 menu
3. Press
▲ or ▼ to choose item; ◄ or ► to open associated dialog box.
4. Press
◄ or ► to choose option desired.
5. Press
▲ or ▼ to return to the COM1 menu, or press the MENU key to register your
selection and close the menu.
Advertising