FUJITSU SCANSNAP! FI-4110EOX2 - Manual (Page 16)

xiv
Before moving the scanner, disconnect the power plug from the
power outlet.
Protect the scanner from static electricity.
Do not use aerosol sprays near the scanner.
Avoid any contact when scanner is in use.
Disconnect the power plug from the power outlet when the
scanner is not used for a long period of time.
Do not install the scanner in the direct sunlight.
Do not move the scanner with the power and interface cables connected as this
might damage the cables, causing fire, electric shock or injuries.
Before moving the scanner, be sure to disconnect the power plug from the power
outlet, and disconnect data cables. Also, make sure that the floor is free of
obstructions.
Install the scanner away from strong magnetic fields and other sources of
electronic noise. Also, protect the scanner from static electricity as this might
cause the scanner to malfunction.
Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt and
dust to enter the scanner, resulting scanner failure and malfunction.
Avoid touching any scanner mechanism when scanning as this may cause
injuries.
When the scanner is not used for a long period of time, be sure to disconnect the
power plug from the power outlet for safety.
Do not install the scanner in the direct sunlight or near heating apparatus. Doing
so might cause excessive heat to build up inside the scanner, causing fire or
scanner trouble. Install the scanner in a well-ventilated location.