FUJITSU SCANSNAP! FI-4110EOX2 - Manual (Page 72)

56
5.1 Clearing Document Jams
If a document jam occurs while the document is being scanned on the ADF, follow the procedure
below to clear the jammed document.
• Take care not to get injured when removing a jammed document.
• When removing jammed documents, be careful not to get neckties or necklaces entangled
in the ScanSnap!.
• The surface of the ADF glass sometimes becomes hot during operation. Take care not to
get burned.
1. Remove the document on the ADF paper chute.
2. Open out the ADF towards you while lifting up the cover open lever.
3. Remove the jammed document.
HINT
Clean the ADF at around the same time that you perform cleaning in "6.3
Cleaning the ADF" (page. 72).
ADF
Cover open lever