FUJITSU SCANSNAP! FI-4110EOX2 - Manual (Page 78)

62
■ Replacing the Pad ASSY
Replace the Pad ASSY by the following procedure.
1. Remove the document if there is a document on the ADF paper chute.
2. Open out the ADF towards you while lifting up the cover open lever.
3. Remove the Pad ASSY.
Press down on the pick arm with one hand, and pull out the Pad ASSY in the direction of the
arrow while holding both ends (a and b) of the Pad ASSY with your other hand.
ADF
Cover open lever
a
b
Pad ASSY
Push down on pick arm.