FUJITSU SCANSNAP! FI-4110EOX2 - Manual (Page 89)

6.3 Cleaning the ADF
ScanSnap! fi-4110EOX2 Operator's Guide
73
D
A
IL
Y CARE
6
2. Clean the following locations with a cloth moistened with cleaner F1.
• Pad ASSY
Clean the Pad ASSY top down (in the direction of the arrow). When cleaning the Pad
ASSY, take care to prevent the cloth from catching on the pick arm or pick spring.
• ADF glass surface
Clean lightly.
• Pick roller
Clean lightly taking care not to scratch the surface of the roller. Take particular care in
cleaning the Pick roller as black debris on the roller adversely affects pickup performance.
• Feed rollers
Clean lightly taking care not to roughen the surface of the rollers. Take particular care in
cleaning the feed rollers as black debris on the rollers adversely affects pickup perfor-
mance.
• Plastic rollers
Clean lightly taking care not to roughen the surface of the rollers. Take particular care in
cleaning the plastic rollers as black debris on the rollers adversely affects pickup perfor-
mance.
• Eject rollers
Clean lightly taking care not to roughen the surface of the rollers.
Take particular care in cleaning the discharge rollers as black debris on the rollers
adversely affects pickup performance.
Rotate the discharge rollers a little bit at a time by pressing the two buttons simultaneously.
(As a guideline, 15 presses of the buttons rotates the Eject roller one full turn.)
Feed rollers
Paper guide surface (white part)
(also located on ADF side)
ADF glass surface
(also located on ADF side)
Plastic rollers
Pick roller
Eject rollers
Pad ASSY
Pick arm
Pick spring