Freescale Semiconductor M9328MX21ADSE - Manual (Page 61)

Support Information
M9328MX21ADSE User’s Manual, Rev. A
Freescale Semiconductor 3-33
3.14 Disposal Information
This symbol means this product may be subject to special disposal requirment.
For product disposal information, please refer to http://www.freescale.com/productdisposal.
B14 USBH1_FS USB FULL SPEED
B15 USBH1_OE_B USB OUTPUT ENABLE
B16 USBH_ON_B USB transceiver ON
C1 GND GROUND
C2 TIN TIMER INPUT CAPTURE — Timer input
C3 TOUT TIMER OUTPUT COMPARE — Timer output
C4 SD2_CLK SD/MMC CLOCK — Clock output to SD/MMC card
C5 SD2_CMD SD/MMC COMMAND — Serial command bit to SD/MMC card, bidirectional
C6 SD2_D3 SD/MMC DATA BIT 3 — Serial data bit to SD/MMC card, bidirectional
C7 SD2_D2 SD/MMC DATA BIT 2 — Serial data bit to SD/MMC card, bidirectional
C8 SD2_D1 SD/MMC DATA BIT 1 — Serial data bit to SD/MMC card, bidirectional
C9 SD2_D0 SD/MMC DATA BIT 0 — Serial data bit to SD/MMC card, bidirectional
C10 PWMO PULSE WIDTH MODULATOR OUTPUT
C11 RESET_OUT_B RESET OUT — Active low reset signal from the processor
C12 RTCK_GPIO RETURN CLOCK — JTAG signal, can be general purpose I/O
C13 USB_OC_B USB OVER CURRENT input active low
C14 USB_PWR USB POWER
C15 USB_BYP_B USB BY PASS input active low
C16 VCC +3 VDC power
Table 3-19. Extension Connector PE3 Signal Description (continued)
Pin(s) Signal Description