Gefen EXT-HD-DSMP - Manual (Page 10)

6
PANEL DESCRIPTIONS
1 IR
This IR window receives signals from the IR Remote Control Unit.
2 STATUS
This LED indicator will flash bright blue to indicate network traffic when the
Media Player is connected to a network.
3 PWR
Power LED indicator. When power is applied to the unit, this LED will glow
bright blue. When no USB device is connected, the LED will alternate blue and
red. When the Media Player is booting, this LED will flash red when accessing
the USB drive.
4 Component
Connect three (3) RCA cables from the Green, Blue, and Red outputs to the
component video input of a display or other video output device.
5 Optical
TOSLINK audio ouput connector. Connect an optical cable from this connector
to an audio output device.
6 HDMI
Connect an HDTV display to this port using the included locking HDMI cable.
7 Ethernet
Connects the Hi-Def Digital Signage Media Player to a network using 10/100
Mbps Ethernet cable.
8 USB
USB 2.0 output ports. Connect up to two (2) USB devices to these ports.
9 12V DC
Connect the included 12 V DC power supply to this power receptacle.
10 Analog Audio Output
Connect a L/R RCA stereo pair from these outputs to an L/R RCA stereo input
pair on an audio output device.
11 Component Output
Connect a single RCA cable from this output to the component video input of a
display or other video output device.