Gefen EXT-HD-DSMP - Manual (Page 14)

10
CONNECTING THE HI-DEF DIGITAL SIGNAGE MEDIA PLAYER
How to Connect the Hi-Def Digital Signage Media Player
1. Connect Hi-Def Digital Signage Media Player to the display using the
included HDMI cable.
2. OPTIONAL: Connect the analog or digital audio outputs of the Hi-Def Digital
Signage Media Player to an audio receiver/processor using RCA (analog) or
Optical (digital) cables.
3. Connect the included USB 2.0 flash drive (or external USB 2.0 hard drive) to
the USB port located on the rear panel of the Hi-Def Digital Signage Media
Player unit.
4. Connect the included 12V DC power adapter between the power input
of the Hi-Def Digital Signage Media Player and an available electrical outlet.
Wiring Diagram for the Hi-Def Digital Signage Media Player
EXT-HD-DSMP
CAT-5 / ETHERNET
HDMI CABLE
USB CABLE
COMPOSITE CABLE
COMPONENT CABLE
TOSLINK
USB Flash Drive
or
USB External HDD
Router
Display using HDMI
Display using Component
Display using Composite
Audio Receiver
ATTENTION: This product should always be connected to a
grounded electrical socket.
STOP: Make sure the USB drive is connected to the Media Player
before continuing to the next step.
NOTE: If using the Hi-Def Digital Signage Media Player with an
analog display, then connect the Hi-Def Digital Signage Media
Player to the display using user-supplied composite or component
video cables.