Gefen EXT-HD-DSMP - Manual (Page 55)

51
SETTINGS.XML SUMMARY
Pull Schedule Configuration
Tag Name: <pullSchedule>
Description: Located within the <pullSchedule> opening and closing
tags. This section allows you to specify when content is
pulled on a daily or hourly basis.
Attributes: pullRepeat
time (daily)
time (hourly)
Example:
If you want to only pull content on a daily basis, then set the
pullRepeat attribute to “daily” then set the time value
under the <daily> tag. Conversely, if you want to pull
content on an hourly basis, then set the pullRepeat
attribute to “hourly” and set the time value under the
<hourly> tag.
In the example above, the pullRepeat value is set to
”hourly” and will pull from the server every 20 minutes.
This value can be changed by 1-minute increments.
If the pullRepeat value was set to “daily”, then
the Media Player would pull content each day at 10:00
am. Note that “daily” time values are based on a
24-hour clock.
To disable Pull mode, set the pullRepeat value to
“none”.
<pullConfig>
...
...
...
<pullSchedule>
<pullRepeat value= ”hourly” />
<none />
<daily>
<time value= ”10:00” />
</daily>
<hourly>
<time value= ”00:20” />
</hourly>
</pullSchedule>
</pullConfig>