Gefen EXT-HD-DSMP - Manual (Page 23)

19
STAND-ALONE MODE
Using Stand-Alone Mode
1. Connect the Hi-Def Digital Signage Media Player according to the
instructions on page 10.
The Media Player comes pre-loaded with a demo playlist, schedule,
and content. After the Hi-Def Digital Signage Media Player has finished
booting, the pre-loaded content will begin playing.
2. Press the HOME button on the IR Remote Control to stop the playback of
the content and access the Input PIN Code screen.
3. Type in the PIN code:
4. From the Main Menu, press the Eject button on the IR Remote Control. This
button will safely eject the USB device before removal.
STOP: Make sure the USB storage device is connected to the
Media Player before power is connected.
WARNING: Removing the USB device without ejecting may cause
the storage device to become unreadable, resulting in the loss or
corruption of content and related files.
NOTE: You can also simply enter the PIN code from the IR Remote
Control while content is playing, to display the Input PIN Code
screen. Press the OK button to display the Main Menu.
S/W Version: Ver.0.9.7.3