Adjustable throttle and brake pedal, Adjustable throttle and brake pedal -30 – GM Chevrolet Avalanche User Manual

Page 100

Advertising
background image

When starting your engine in very cold weather
(below 0°F or

18°C), do this:

1. With your foot off the accelerator pedal, turn the

ignition key to START and hold it there up to
15 seconds. When the engine starts, let go of
the key.

2. If your engine still will not start, or starts but then

stops, it could be flooded with too much gasoline.
Try pushing your accelerator pedal all the way to the
floor and holding it there as you hold the key in
START for about three seconds. When the engine
starts, let go of the key and accelerator. If the
vehicle starts briefly but then stops again, do the
same thing, but this time keep the pedal down
for five or six seconds. This clears the extra
gasoline from the engine.

Notice: Your engine is designed to work with the
electronics in your vehicle. If you add electrical
parts or accessories, you could change the way the
engine operates. Before adding electrical equipment,
check with your dealer. If you do not, your engine
might not perform properly.

Adjustable Throttle and Brake Pedal

If your vehicle has this feature, you can change the
position of the throttle and brake pedals. This feature is
designed for shorter drivers, since the pedals cannot
move farther away from the standard position, but can
move closer to you for better pedal reach. This
feature can be programmed to work with the memory
function (if equipped) on your vehicle. See Memory Seat
on page 2-85.

The vehicle must be in PARK (P) for this feature
to operate.

The buttons used to
adjust the pedals are
located on the driver’s
side door panel.

Press the button closest to you to move the pedals
closer to you. Press the button farthest from you to move
the pedals away from you.

2-30

Advertising