How to reset the engine oil life system, What to do with used oil – GM Chevrolet Avalanche User Manual

Page 355

Advertising
background image

How to Reset the Engine Oil
Life System

The Engine Oil Life System calculates when to change
your engine oil and filter based on vehicle use.
Anytime your oil is changed, reset the system so it can
calculate when the next oil change is required. If a
situation occurs where you change your oil prior to a
CHANGE ENGINE OIL message being turned on, reset
the system.

To reset the CHANGE ENGINE OIL message, see
“Engine Oil Life System” under DIC Operation and
Displays
on page 3-46 for vehicles equipped with the
DIC, or do the following:

1. Turn the ignition key to RUN with the engine off.

2. Fully press and release the accelerator pedal slowly

three times within five seconds.

If the OIL LIFE RESET message flashes for
10 seconds, the system is resetting.

3. Turn the key to LOCK.

If the CHANGE ENGINE OIL message comes back on
when you start your vehicle, the engine oil life system
has not reset. Repeat the procedure. If it still does
not reset, see your dealer for service.

What to Do with Used Oil

Used engine oil contains certain elements that may be
unhealthy for your skin and could even cause cancer.
Do not let used oil stay on your skin for very long. Clean
your skin and nails with soap and water, or a good
hand cleaner. Wash or properly dispose of clothing or
rags containing used engine oil. See the manufacturer’s
warnings about the use and disposal of oil products.

Used oil can be a threat to the environment. If you
change your own oil, be sure to drain all the oil from the
filter before disposal. Never dispose of oil by putting it
in the trash, pouring it on the ground, into sewers, or into
streams or bodies of water. Instead, recycle it by
taking it to a place that collects used oil. If you have a
problem properly disposing of your used oil, ask
your dealer, a service station or a local recycling center
for help.

5-21

Advertising